| Universal Multiplexer is equipment for multiplexing various types of signals to onward transmission either by Fiber optic or by Radio means. While using fiber optic link it uses WDM technology on one single-mode fiber for duplex communication. For Radio communication, it provides a G.703 compliant (2.048Mbps) output. The UniMux is a modular system. User can configure the multiplexer based on the actual field requirements. |
 |
| |
| Specifications |
| |
|
Multiplexing Module
- Modular construction
- E1 standard Framing
- Suitable for Fiber/RF links
- WDM on single mode fiber
- 30 x 64k bearer channels
Communication Modules
- Serial communication Module
- Four channels
- RS232/422 factory set
- Optionally all hand-shaking signals carried
- All inputs optically isolated
- Occupies five (with handshake) or four (without handshake) bearer channels consecutively
- First bearer channel user selectable
- Module level baud rate selection (9600, 19200, 38400 and one other)
- Channel level baud rate selection can be given for fixed configuration of multiplexer
- Digital I/O Module
- 32 Command inputs
- 32 Status outputs
- All inputs optically isolated
- TTL/RS422 level inputs
- TTL outputs
- Occupies two consecutive bearer channels
- First bearer channel user selectable
- Random Vibration:
- 20 - 50 Hz 0.02 g2/Hz
- 50 - 500 Hz 0.001 g2/hz
- All 3-axes, 30min/axis
|
|
- Voice Module
- Full duplex voice
- Three possible inputs
- 600W Two wire
- Line-in
- Mic
- Three simultaneous outputs
- 600 W Two wire
- Line-out
- Speaker 100mW
- Occupies one bearer channel
- Bearer channel selectable
Environmental
- Temperature
- Operating : -20 to +55°C
- Storage : -30 to +65°C
- Humidity
- 95% non-condensing
- Damp Heat
- 45°C at max. humidity
- EMI/EMC
- Meets RS-03, CS-02, CS-06, ESD per
- MIL-STD-461C
Enclosure
- Standard 19" rack mountable
EMI/EMC
complaint 3U card frame
|
|
| |
 |
| |
|
| |
|
